Setting up Cisco 7960 without Call Manager

[Crusader]

I was recently bought a Cisco 7960 IP phone for my home office. Unfortunately i know nothing about VoIP. Now as it turns out this was a spare unit, and as such i dont have the Call Manager and am rather lost with the setup. The phone just says "Configuring IP".

The phone is hooked up to a Netgear DG834G, and i have a voiptalk.org account, which requires SIP

If someone could talk me through the process i would appreciate it

[Nick]

This Link (http://www.cisco.com/E-Learning/bulk/public/celc/7960_Tutorial/index.html) might help to use the phone! ;)

But will look into how to set it up for you and post here.

[Nick]

Link to article (http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml)


Manually Configure the Phone Network Settings

Complete these steps in order to manually configure the phone network settings:


Press the **# buttons in order to unlock the phone. (This step either locks or unlocks the options, based on the current state.)
Press Settings.
Press the down arrow in order to select Network Configuration and press the Select softkey. There is an unlocked padlock icon in the upper-right portion of your LCD.
Use the toggle button and the arrow keys in order to modify any parameters. When you enter IP addresses, the * key is used for decimal points.
Press the Save softkey in order to save your changes.
Note: In order to lock the phone settings, press **#.

[Crusader]

Link to article (http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml)


Manually Configure the Phone Network Settings

Complete these steps in order to manually configure the phone network settings:


Press the **# buttons in order to unlock the phone. (This step either locks or unlocks the options, based on the current state.)
Press Settings.
Press the down arrow in order to select Network Configuration and press the Select softkey. There is an unlocked padlock icon in the upper-right portion of your LCD.
Use the toggle button and the arrow keys in order to modify any parameters. When you enter IP addresses, the * key is used for decimal points.
Press the Save softkey in order to save your changes.
Note: In order to lock the phone settings, press **#.


Right, im not sure what is being reffered to as the "toggle" button, but when i tried this the softkey button which says edit, when i press it it says that key is not active here

[Nick]

This is bit of a hard one as the model and make you have are quite a hard setup and won't be easy for first time VoIp users either. Very high spec!!

Personally I'd sell it and opt for a more user friendly phone from SNOM or SIEMENS

[patriot1sk]

Hi,
I have cisco 7960 ip phone and it's configured via tftp. Now i want to change and add some features in the existing sip configuration. How can i download the sip configuration file from the phone via tftp server on my computer to change and upload again. Please help. Thx